|
SAPCAR Performance Series |
|
Must consist of two parts: A cab (no more than 7-1/2” long, no less than 7”, must be at least 3” tall)
and a Trailer (must be at least 4-1/4” tall), connected/disconnected with a single pivot pin (no hinges)
and it will be disconnected to be weighted in. Must appear as a regular semi-truck like you would see
on the road.
Weight: not to exceed 22 oz. combined
Length: not to exceed 17-1/2 in. No part of the truck (or accessories) may extend past the
starting post.
Width: no more than 3-1/4 in. overall, no less than 1 3/4 in. tire tracking
Track Clearance: min. 3/8 in.
Wheelbase: two near front of cab, 2-dual sets at back of cab and two dual sets at back of trailer
Axles:
Nails, must remain the stock size .086 - .096 are only allowed.Aftermarket Axles are allowed. As long as they meet the diameter requirements.
Wheels: 18 wheels (on 10 axles) They must be recognizable as: BSA wide Wheel, Pine Car wide
wheel, Pine Pro (R.A. wide wheel) or Awana wide wheel. No spacers or shims. Outside
wheels of dualies may be slightly trimmed down, but must stay original width.
Lube:
Lubricants must be dry on the axle at race time. Wet, oily, or greasy axles are not allowed.
Over-application of lubricant which results in excessive shedding onto the track is not allowed.
Approved lubricants include (but are not limited to) graphite, Teflon, Nyloil, and Krytox.
********These will cost extra on the shipping