|
SAPCAR Performance Series
|
Height : Not to exceed 2 -3/4 “
Length : Not to exceed 7”
Weight : Not to exceed 9 ounces
Width : Not to exceed 3-1/4 inches
Center Rail Height : 3/8”
Center Rail Width : 1 - 3/4”
The main part of the body can be made of Pinewood or can be covered with a plastic model kit.
Additional materials maybe added.
Wheel Base
: no specifictionWheels
must be open and two wheels glued together as one on each axle (wide wheel)BSA wide wheel
Pine car wide wheel
Pine-Pro (RA wide wheel)
Awana wide wheel
Nails, must remain the stock size .086 - .096 are only allowed.
Aftermarket Axles are allowed. As long as they meet the diameter requirements.
Lube:
Lubricants must be dry on the axle at race time. Wet, oily, or greasy axles are not allowed.
Over-application of lubricant which results in excessive shedding onto the track is not allowed.
Approved lubricants include (but are not limited to) graphite, Teflon, Nyloil, and Krytox.
Must look like old style (coupe,coach, vega, pinto or cavalier ONLY) modified cars (open engine must be
visible & wide wheels)